Blade Performance

Clay Bar 200g Medium Grade with Storage Case

£9.00
Tax included. Shipping calculated at checkout.

Wash the car, dry it, then run your fingertips over the bonnet. If it feels gritty, that is bonded contamination: brake dust fallout, tar, tree sap and overspray that no shampoo will move. This 200g medium-grade clay bar shears it off the surface and leaves the paint glass smooth, ready for polish, wax or a coating.

Why it works

  • Medium grade - enough bite for a daily driver that has never been clayed
  • Lifts fallout, tar spots, tree sap, overspray and water-spot minerals
  • Works on paint, glass and gloss trim
  • 200g bar - split it into three or four pieces so a dropped piece is not the end of the bar
  • Shows you the dirt: the clay greys, you fold it, and a clean face comes through
  • Comes in a hinged plastic case that keeps it clean between uses

When to use it

After the wash and before any polishing, waxing or sealing. Once or twice a year is plenty for most road cars, or whenever the paint feels rough after washing. Bonnet, roof, lower doors and the rear end usually carry the most.

Specification

Weight 200g
Grade Medium
Product type Clay Bar
Suitable for Paint, glass, gloss trim
In the box 1 x 200g clay bar, plastic storage case

Straight from us

At 200g this is twice the clay of most bars, so there is no reason to use it in one lump. Tear off a quarter, keep the rest in the case, and pair it with a proper lube such as Glir Clay Lubricant. Lubricant is what stops clay marring the paint.

What it won't do

It will not remove swirls or scratches - claying is decontamination, not correction, and a medium clay can leave light marring on soft paint, so plan a polish afterwards. It also strips wax, so the car needs protecting again once you are done.

Frequently asked questions

Do I need a clay lubricant?
Yes, always. Clay on a dry panel grabs and mars the paint, so keep the surface wet with a clay lube or a slick shampoo mix.

How many cars will a 200g clay bar do?
Several. Use a quarter of the bar at a time, fold it to a clean face as it greys, and bin a piece once no clean face is left.

What if I drop the clay?
Throw that piece away. Clay picks up grit from the ground and will scratch the paint, which is why working with a small piece makes sense.

Clay bar or clay towel?
A bar bites harder and is better for a first-time or heavily contaminated car. A clay towel is quicker and rinses clean, so it suits regular top-up decontamination.

Browse all clay bars and clay lube at Blade Performance.

Directions

1. Wash and rinse the car first, and chemically decontaminate with an iron and tar remover if you have them.
2. Knead the bar into a flat disc that sits comfortably under your fingers.
3. Soak the panel with clay lube or a slick shampoo solution - never work a dry panel.
4. Glide the bar over the wet panel in straight lines with light pressure until it moves freely.
5. Wipe the residue off with a clean microfibre, re-lubricate and move on to the next section.
6. Fold and re-knead the bar regularly to bring a clean face through.

If you drop it on the ground, throw it away - it will pick up grit and scratch the paint. Store it in a sealed tub, out of the cold. Follow with a polish, wax or sealant, as claying strips protection.

When Will i get my order

We aim to dispatch orders within 1 working day using Fastway 48-hour delivery. Once your order is on its way, you’ll receive tracking details so you can follow your delivery. Please allow extra time during weekends, bank holidays or busy periods.