Blade Autostyling
BMW 2 Series Gran Coupe F44 Front Splitter — M Pack
products.product.pickup_availability.unavailable
Fits the BMW 2 Series Gran Coupe F44, 2019 onwards — M Sport bumper. Not the F22 2 Series Coupe — different bumper.
The M Sport bumper on the BMW 2 Series Gran Coupe F44 stops short at the bottom and the front of the car looks like it is sitting on tiptoes. This front splitter closes that gap and drops the visual line by a few centimetres: gloss black out of the box, screwed into the underside of the bumper, and nothing is cut.
About the front splitter
A one-piece lower splitter in Blade Autostyling's M Pack design that runs the full width of the front bumper, sitting under the standard valance and following its line into the corners. It is vacuum-formed plastic, which keeps the part light and lets it flex over a knock rather than crack.
It arrives in gloss black with the protective film still on, ready to go on the car. Once fitted the front of the car reads lower and wider, and the gap between bumper and road is gone.
Will it fit your BMW?
| Model | Years | Fits |
|---|---|---|
| BMW 2 Series Gran Coupe F44 — M Sport bumper | 2019 onwards | Yes |
| F22 2 Series Coupe | No — different moulding |
Specification
| Material | Vacuum-formed plastic |
| Finish | Gloss black, ready to fit |
| Pieces | 1 |
| Fixing | Self-tapping screws into the underside of the bumper |
| Fitting time | About an hour |
| In the box | One piece, protective film applied. Screws are not included — any 4mm self-tapping screw does the job. |
| Part no. | CW-15 |
Fitting it
Clean the underside of the bumper with panel wipe. Offer the splitter up with the car on ramps or axle stands and check the gap at both ends before anything is drilled — a bumper that has been off the car before rarely sits square. Centre it with masking tape, pilot-drill through the splitter into the plastic underside of the bumper, and run the screws in from the centre outwards. Leave the protective film on until the last screw is in.
Delivery, fitting and returns
Delivery is £20 to any UK or Ireland address, on every body kit part. Or have it fitted at Blade Performance in Portadown for an extra £20 — supplied and fitted the same day, and we warrant the fit. Check the splitter against the car before the protective film comes off, and let us know about any transit damage within 48 hours of delivery.
What it won't do
It will not hide a damaged bumper. The splitter sits below the bumper; a scuff above it still shows.
It does not generate downforce. At this price nothing does, and we are not going to pretend otherwise — this is a styling part.
It is not injection-moulded ABS. Vacuum-formed plastic is lighter and more forgiving on impact, but it is thinner, and it is not a structural part.
Frequently asked questions
Does the BMW 2 Series Gran Coupe F44 front splitter need painting?
No. It is supplied in gloss black and goes straight on the car.
Do you have to drill the bumper to fit a front splitter?
Yes, into the plastic underside only — never into bodywork or paint. The screws are hidden behind the splitter once it is on, and screws are the only fixing that survives a wet motorway.
Will it survive speed bumps?
On a standard-height BMW 2 Series Gran Coupe F44, yes. On coilovers at fully dropped it will make contact — approach at an angle.
Can I collect it or have it fitted?
Yes. Collect from the shop in Portadown, or book it in and we fit it while you wait.
Complete the kit: pair it with side skirts and a rear spoiler for the full look.
See the rest of the BMW body kit range.
Directions
When Will i get my order
We aim to dispatch orders within 1 working day using Fastway 48-hour delivery. Once your order is on its way, you’ll receive tracking details so you can follow your delivery. Please allow extra time during weekends, bank holidays or busy periods.