Twister Soft Upholstery Drill Brush

Hand scrubbing a seat works, but it takes twenty minutes a seat and your forearm gives out before the stain does. The Twister puts the agitation on a drill. A round soft-bristle brush with an adapter for a standard drill chuck or an M14 polisher, it spins cleaner into carpet, fabric and leather far faster than a hand brush and with even pressure across the whole head. Three head sizes: 50mm for seams and piping, 100mm for seat bolsters and door cards, 125mm for carpets and boot floors.

Why it works

• Machine agitation lifts ground-in dirt a hand brush leaves behind
• Soft bristle grade is safe on fabric, Alcantara-style cloth and finished leather
• Adapter included — fits a drill chuck or an M14 polisher thread
• 50mm head for seams, cup holders and piping; 100mm for seats and door cards; 125mm for carpets and mats
• Even pressure across the head, so no scrub marks in the pile

When to use it

Any interior deep clean. Spray APC or a fabric cleaner, run the Twister at a low drill speed to work it into a foam, then extract or blot with a microfibre. Carpets and boot floors are where the 125mm head pays for itself.

Specification

Straight from us

Low speed. A drill at full tilt will fling cleaner up the windows and can fuzz a fabric seat. Trigger just enough to spin it, let the bristles do the work, and keep it moving.

What it won't do

It will not extract — it loosens the dirt, and you still need to lift it out with a wet vac or a microfibre. And it is the soft grade: for heavily soiled van carpets you may want a stiffer brush.

Frequently asked questions

Which Twister size do I need?
50mm for seams, piping and cup holders; 100mm for seat faces, bolsters and door cards; 125mm for carpets, mats and boot floors. Most people start with the 100mm.

Does it fit a normal cordless drill?
Yes. The included adapter fits a standard drill chuck, and the brush also threads onto an M14 polisher.

Is the soft Twister safe on leather?
Yes on finished leather with a leather cleaner and light pressure. Keep it off unfinished or aniline leather.

What speed should I run it at?
As low as the drill will go. Speed spreads product and fuzzes fabric; it does not clean any better.

Browse the full ADBL range at Blade Performance.