{"title":"Audi A3 8V Body Kit Parts","description":"\u003cp\u003eThe A3 8V gets two front lips — one for the S3 bumper (2016–2020) and one for the facelift S-Line (2017–2019) — a cap spoiler for the Sportback and hatch, a boot spoiler for the saloon, and gloss black mirror covers that fit the whole 2012–2019 run. Check whether your car is S-Line or S3 and pre- or post-facelift: the lips are different mouldings.\u003c\/p\u003e\n\u003cp\u003eFull \u003ca href=\"\/collections\/audi-body-kits\"\u003eAudi range\u003c\/a\u003e or \u003ca href=\"\/collections\/mirror-covers\"\u003eall mirror covers\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"a3-8v-boot-spoiler","title":"Audi A3 8V Saloon Boot Spoiler","description":"\u003cp\u003e\u003cstrong\u003eFits the Audi A3 8V Saloon Rear, 2014-2020 — Sport Edition \u0026amp; S-Line.\u003c\/strong\u003e Not the A3 8V — different mouldings, listed separately below.\u003c\/p\u003e\n\u003cp\u003eA low boot-lid spoiler for the A3 8V Saloon Rear — the cheapest visible change on the car. Gloss black out of the box, tape-fit along the trailing edge of the boot, no holes.\u003c\/p\u003e\n\u003ch3\u003eWhy it works\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTape fit — nothing is drilled through the boot lid\u003c\/li\u003e\n\u003cli\u003eGloss black finish — no paint, no bodyshop\u003c\/li\u003e\n\u003cli\u003eInjection-moulded ABS — stiffer and heavier than a vacuum-formed part\u003c\/li\u003e\n\u003cli\u003eHalf an hour with the boot open\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it fit your A3?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA3 8V SE\u003c\/td\u003e\n\u003ctd\u003e2014- 2020\u003c\/td\u003e\n\u003ctd\u003eYes - Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA3 8V S-Line\u003c\/td\u003e\n\u003ctd\u003e2014\u003c\/td\u003e\n\u003ctd\u003eYes - Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA3 8V\u003c\/td\u003e\n\u003ctd\u003eAny Hatchback model\u003c\/td\u003e\n\u003ctd\u003eNo — different moulding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGloss black ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGloss black, ready to fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePieces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFixing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAutomotive double-sided tape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitting time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30 Minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupplied as\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOne piece, protective film applied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitting it\u003c\/h3\u003e\n\u003cp\u003eClean the boot edge with panel wipe. Dry fit and mark the centre with masking tape before the backing paper comes off. Warm both surfaces, press from the centre outwards, and leave 24 hours before washing.\u003c\/p\u003e\n\u003cp\u003eOr bring it to us — we fit these in Portadown and warrant the fit.\u003c\/p\u003e\n\u003ch3\u003eStraight from us\u003c\/h3\u003e\n\u003cp\u003eThe Spoiler is a direct Fitment to the compatible cars\u003c\/p\u003e\n\u003ch3\u003eWhat it won't do\u003c\/h3\u003e\n\u003cp\u003eIt is not a wing. It does not generate downforce.\u003c\/p\u003e\n\u003cp\u003eIt is for the saloon boot lid. It does not fit a hatch or an estate tailgate.\u003c\/p\u003e\n\u003cp\u003eABS is tough but it is not indestructible — a hard kerb strike will crack it rather than bend it.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWill the A3 8V Saloon Rear boot spoiler fit the A3 8V?\u003c\/strong\u003e\u003cbr\u003eNo. The A3 8V is a different moulding. Check the fitment table above before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the A3 8V Saloon Rear boot spoiler need drilling?\u003c\/strong\u003e\u003cbr\u003eNo. Automotive double-sided tape onto a clean, warm boot edge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit the estate or the hatch?\u003c\/strong\u003e\u003cbr\u003eNo. This is shaped for the saloon boot lid.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need painting?\u003c\/strong\u003e\u003cbr\u003eNo. It is supplied in gloss black and goes straight on.\u003c\/p\u003e\n\u003cp\u003eSee the rest of the \u003ca href=\"\/collections\/audi-a3-8v-body-kits\"\u003eA3 8V styling range\u003c\/a\u003e.\u003c\/p\u003e","brand":"Blade Autostyling","offers":[{"title":"Default Title","offer_id":56243509363073,"sku":"A38VSPOPB12","price":85.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/2316\/1362\/files\/Untitleddesign_8.png?v=1789053246"},{"product_id":"audi-a3-8v-s3-rear-cap-spoiler","title":"Audi A3 8V S3 Rear Cap Spoiler","description":"\u003cp\u003e\u003cstrong\u003eFits the Audi A3 8V S3, 2012–2020 — S3 \/ S-Line hatch.\u003c\/strong\u003e Not the A3 8Y — different mouldings, listed separately below.\u003c\/p\u003e\n\u003cp\u003eA cap spoiler for the Audi A3 8V S3 — it sits over the top edge of the factory hatch spoiler and extends it, rather than replacing it. Gloss black out of the box, tape-fit, nothing removed from the car.\u003c\/p\u003e\n\u003ch3\u003eWhy it works\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGoes over the factory spoiler — nothing is removed\u003c\/li\u003e\n\u003cli\u003eTape fit, no drilling\u003c\/li\u003e\n\u003cli\u003eGloss black finish — no paint\u003c\/li\u003e\n\u003cli\u003eInjection-moulded ABS — stiffer and heavier than a vacuum-formed part\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it fit your Audi?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA3 8Y\u003c\/td\u003e\n\u003ctd\u003eS-Line\/S3 Hatchback\u003c\/td\u003e\n\u003ctd\u003eYes- Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA3 8Y\u003c\/td\u003e\n\u003ctd\u003eSport Edition (SE) Hatchback\u003c\/td\u003e\n\u003ctd\u003eNo - not Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA3 8Y\u003c\/td\u003e\n\u003ctd\u003eSport Edition (SE) Hatchback\u003c\/td\u003e\n\u003ctd\u003eNo — not Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGloss black ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGloss black, ready to fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePieces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFixing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAutomotive double-sided tape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitting time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHalf an hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupplied as\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOne piece, protective film applied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitting it\u003c\/h3\u003e\n\u003cp\u003eClean the factory spoiler with panel wipe. Dry fit and check it sits flush along the whole edge before the backing paper comes off. Warm both surfaces, press firmly, leave 24 hours.\u003c\/p\u003e\n\u003cp\u003eOr bring it to us — we fit these in Portadown and warrant the fit.\u003c\/p\u003e\n\u003ch3\u003eStraight from us\u003c\/h3\u003e\n\u003cp\u003e[WRITE THIS — two or three sentences from someone who has fitted one]\u003c\/p\u003e\n\u003ch3\u003eWhat it won't do\u003c\/h3\u003e\n\u003cp\u003eIt does not replace the factory spoiler — it needs the factory spoiler there to sit on.\u003c\/p\u003e\n\u003cp\u003eIt is not aerodynamic.\u003c\/p\u003e\n\u003cp\u003eABS is tough but it is not indestructible — a hard kerb strike will crack it rather than bend it.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWill the Audi A3 8V S3 rear cap spoiler fit the A3 8Y?\u003c\/strong\u003e\u003cbr\u003eNo. The A3 8Y is a different moulding. Check the fitment table above before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Audi A3 8V S3 cap spoiler replace the factory spoiler?\u003c\/strong\u003e\u003cbr\u003eNo. It sits over the top edge of the existing spoiler and extends it. The car needs the factory spoiler fitted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need drilling?\u003c\/strong\u003e\u003cbr\u003eNo. Tape fit onto a clean, warm surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need painting?\u003c\/strong\u003e\u003cbr\u003eNo. It is supplied in gloss black.\u003c\/p\u003e\n\u003cp\u003eSee the rest of the \u003ca href=\"\/collections\/audi-a3-8v-body-kits\"\u003eA3 8V styling range\u003c\/a\u003e.\u003c\/p\u003e","brand":"Blade Autostyling","offers":[{"title":"Default Title","offer_id":56243712098689,"sku":"A312-SPRF-S3C-PB","price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/2316\/1362\/files\/Untitleddesign_11.png?v=1789061105"},{"product_id":"audi-a3-8v-batman-mirror-caps-mirror-covers","title":"Audi A3 8V Mirror Covers","description":"\u003cp\u003e\u003cstrong\u003eFits the Audi A3 8V Batman Mirror Caps, 2012–2019 — SE\/ S-Line.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cheapest visible change on the Audi A3 8V Batman Mirror Caps. A pair of gloss black covers that clip over the original mirror caps — no paint, no tools, ten minutes, and the originals stay on the car underneath.\u003c\/p\u003e\n\u003ch3\u003eWhy it works\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClip over the original caps — nothing is removed and nothing is painted\u003c\/li\u003e\n\u003cli\u003eSold as a pair\u003c\/li\u003e\n\u003cli\u003eGloss black finish\u003c\/li\u003e\n\u003cli\u003eReversible: pull them off and the car is standard again\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it fit your Audi?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA3 8V S-Line\u003c\/td\u003e\n\u003ctd\u003e2012-2019\u003c\/td\u003e\n\u003ctd\u003eYes - Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA3 8V Sport Edition SE\u003c\/td\u003e\n\u003ctd\u003e2012-2019\u003c\/td\u003e\n\u003ctd\u003eYes - Compatible \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGloss black, ready to fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePieces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFixing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eClip over the original caps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitting time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTen minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupplied as\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 pieces, protective film applied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitting it\u003c\/h3\u003e\n\u003cp\u003eClean the original caps with panel wipe. Offer each cover up from the leading edge, press it on and check the edge sits flush all the way round. That is it.\u003c\/p\u003e\n\u003cp\u003eOr bring it to us — we fit these in Portadown and warrant the fit.\u003c\/p\u003e\n\u003ch3\u003eWhat it won't do\u003c\/h3\u003e\n\u003cp\u003eThey do not replace the caps. They go over them — the originals stay on.\u003c\/p\u003e\n\u003cp\u003eThey do not change the mirror glass, the indicators or the folding.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDo the Audi A3 8V Batman Mirror Caps mirror covers replace the original caps?\u003c\/strong\u003e\u003cbr\u003eNo. They clip over the original caps, which stay on the car. Pull them off and the car is standard again.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre they a pair?\u003c\/strong\u003e\u003cbr\u003eYes, left and right together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo they need painting?\u003c\/strong\u003e\u003cbr\u003eNo. Supplied in gloss black.\u003c\/p\u003e\n\u003cp\u003eSee the rest of the \u003ca href=\"\/collections\/audi-a3-8v-body-kits\"\u003eA3 8V styling range\u003c\/a\u003e.\u003c\/p\u003e","brand":"Blade Autostyling","offers":[{"title":"Default Title","offer_id":56243959628161,"sku":"A3128V-MC-DL-PB","price":45.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/2316\/1362\/files\/Untitleddesign_13.png?v=1789067149"},{"product_id":"audi-a3-8v-facelift-front-lip","title":"Audi A3 8V Facelift ABS Front Lip","description":"\u003cp\u003e\u003cstrong\u003eFits the Audi A3 8V Facelift, 2017–2019 — facelift bumper.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe facelift bumper on the Audi A3 8V Facelift stops short of where it should. This lip closes that gap: gloss black out of the box, fixed with tape and screws into the underside of the bumper, and nothing is cut.\u003c\/p\u003e\n\u003ch3\u003eWhy it works\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMoulded for the facelift bumper specifically, not a universal strip trimmed to fit\u003c\/li\u003e\n\u003cli\u003eGloss black finish — no paint, no bodyshop, no colour match to get wrong\u003c\/li\u003e\n\u003cli\u003eVacuum-formed plastic: flexes over a knock instead of cracking like fibreglass\u003c\/li\u003e\n\u003cli\u003eFixes to the plastic bumper only — the bodywork is never drilled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill it fit your Audi?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA3 8V S-Line\u003c\/td\u003e\n\u003ctd\u003e2012-2019\u003c\/td\u003e\n\u003ctd\u003eYes - Compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA3 8V Sport Edition SE\u003c\/td\u003e\n\u003ctd\u003eYes - Compatible\u003c\/td\u003e\n\u003ctd\u003eYes - Compatible \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVacuum-formed plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGloss black, ready to fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePieces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFixing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eself-tapping screws into the underside of the bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitting time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e60 Minutes \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupplied as\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOne piece, protective film applied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003eFitting it\u003c\/h3\u003e\n\u003cp\u003eClean the bonding face with panel wipe — not polish, not a quick detailer. Dry fit the lip and check the gap at both ends before the backing paper comes off, because a bumper that has been off the car before rarely sits square. Work above 15°C so the tape grabs. Tape holds the alignment, the screws hold the lip. Leave it 24 hours before a pressure washer or a motorway.\u003c\/p\u003e\n\u003cp\u003eOr bring it to us — we fit these in Portadown and warrant the fit.\u003c\/p\u003e\n\u003ch3\u003eWhat it won't do\u003c\/h3\u003e\n\u003cp\u003eIt is not aerodynamic. At this price nothing generates downforce and we are not going to pretend otherwise — this is a styling part.\u003c\/p\u003e\n\u003cp\u003eIt will not hide a damaged bumper. The lip sits below the bumper; a scuff above it still shows.\u003c\/p\u003e\n\u003cp\u003eIt is not injection-moulded ABS. Vacuum-formed plastic is lighter and more forgiving on impact, but it is thinner, and it is not a structural part.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Audi A3 8V Facelift front lip need painting?\u003c\/strong\u003e\u003cbr\u003eNo. It is supplied in gloss black and goes straight on the car.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you have to drill the bumper to fit a front lip?\u003c\/strong\u003e\u003cbr\u003eThe screws go into the plastic underside of the bumper, never into bodywork or paint, and they are hidden behind the lip once it is on. Tape alone will not survive a wet motorway, so both fixings are used.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it survive speed bumps?\u003c\/strong\u003e\u003cbr\u003eOn a standard-height Audi A3 8V Facelift, yes. On coilovers at fully dropped it will make contact — approach at an angle.\u003c\/p\u003e\n\u003cp\u003eSee the rest of the \u003ca href=\"\/collections\/audi-a3-8v-body-kits\"\u003eA3 8V styling range\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Blade Autostyling","offers":[{"title":"Default Title","offer_id":56243966280065,"sku":"DP065791","price":110.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/2316\/1362\/files\/ChatGPT_Image_Sep_23_2026_01_06_26_PM.png?v=1790165226"},{"product_id":"audi-a3-8v-sportback-front-splitter-rs3-v1","title":"Audi A3 8V Sportback Front Splitter — RS3 V1","description":"\u003cp\u003e\u003cstrong\u003eFits the Audi A3 8V Sportback, 2012 onwards — Fits Audi RS3.\u003c\/strong\u003e Not the A3 8Y or standard or S3  (2020 on) — different bumper.\u003c\/p\u003e\n\u003cp\u003eThe standard and S-Line bumpers on the Audi A3 8V Sportback stop short at the bottom and the front of the car looks like it is sitting on tiptoes. This front splitter closes that gap and drops the visual line by a few centimetres: screwed into the underside of the bumper, and nothing is cut.\u003c\/p\u003e\n\u003ch3\u003eAbout the front splitter\u003c\/h3\u003e\n\u003cp\u003eA one-piece lower splitter in Blade Autostyling's RS3 V1 design that runs the full width of the front bumper, sitting under the standard valance and following its line into the corners. It is vacuum-formed plastic, which keeps the part light and lets it flex over a knock rather than crack.\u003c\/p\u003e\n\u003cp\u003eIt arrives with the protective film still on. Once fitted the front of the car reads lower and wider, and the gap between bumper and road is gone.\u003c\/p\u003e\n\u003ch3\u003eWill it fit your Audi?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi RS3 8V Sportback \u003c\/td\u003e\n\u003ctd\u003e2012 onwards\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA3 8Y (2020 on)\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003eNo — different moulding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVacuum-formed plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePieces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFixing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSelf-tapping screws into the underside of the bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitting time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAbout an hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOne piece. Screws are not included — any 4mm self-tapping screw does the job.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart no.\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCW-04\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eFitting it\u003c\/h3\u003e\n\u003cp\u003eClean the underside of the bumper with panel wipe. Offer the splitter up with the car on ramps or axle stands and check the gap at both ends before anything is drilled — a bumper that has been off the car before rarely sits square. Centre it with masking tape, pilot-drill through the splitter into the plastic underside of the bumper, and run the screws in from the centre outwards. Leave the protective film on until the last screw is in.\u003c\/p\u003e\n\u003ch3\u003eDelivery, fitting and returns\u003c\/h3\u003e\n\u003cp\u003eDelivery is £20 to any UK or Ireland address, on every body kit part. Or have it fitted at Blade Performance in Portadown for an extra £20 — supplied and fitted the same day, and we warrant the fit. Check the splitter against the car before the protective film comes off, and let us know about any transit damage within 48 hours of delivery.\u003c\/p\u003e\n\u003ch3\u003eWhat it won't do\u003c\/h3\u003e\n\u003cp\u003eIt will not hide a damaged bumper. The splitter sits below the bumper; a scuff above it still shows.\u003c\/p\u003e\n\u003cp\u003eIt does not generate downforce. At this price nothing does, and we are not going to pretend otherwise — this is a styling part.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Audi A3 8V Sportback front splitter a direct fit?\u003c\/strong\u003e\u003cbr\u003eYes. It is moulded for the standard and S-Line bumpers on the Audi A3 8V Sportback, not a universal strip trimmed to fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you have to drill the bumper to fit a front splitter?\u003c\/strong\u003e\u003cbr\u003eYes, into the plastic underside only — never into bodywork or paint. The screws are hidden behind the splitter once it is on, and screws are the only fixing that survives a wet motorway.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it survive speed bumps?\u003c\/strong\u003e\u003cbr\u003eOn a standard-height Audi A3 8V Sportback, yes. On coilovers at fully dropped it will make contact — approach at an angle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I collect it or have it fitted?\u003c\/strong\u003e\u003cbr\u003eYes. Collect from the shop in Portadown, or book it in and we fit it while you wait.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComplete the kit:\u003c\/strong\u003e pair it with the Audi A3 8V Sportback \u003ca href=\"\/products\/audi-a3-8v-sportback-rear-diffuser-aero\"\u003erear diffuser\u003c\/a\u003e for the full look.\u003c\/p\u003e\n\u003cp\u003eSee the rest of the \u003ca href=\"\/collections\/audi-a3-8v-body-kits\"\u003eAudi A3 8V Sportback body kit range\u003c\/a\u003e.\u003c\/p\u003e","brand":"Blade Autostyling","offers":[{"title":"Default Title","offer_id":56300941345153,"sku":"CW-AN1031826-04","price":114.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/2316\/1362\/files\/Red_Audi_RS6_Against_Graffiti_Wall.png?v=1791323263"},{"product_id":"audi-s3-8v-saloon-rear-diffuser-s3-s-lin","title":"Audi S3\/S-Line 8V Saloon Rear Diffuser","description":"\u003cp\u003e\u003cstrong\u003eFits the Audi S3 8V Saloon, 2012 onwards — S3\/ S-Line rear bumper.\u003c\/strong\u003e Not the S3 8V Sportback — different bumper, listed separately.\u003c\/p\u003e\n\u003cp\u003eThe rear valance on the Audi S3 8V Saloon is flat, and from behind the car looks unfinished next to the rest of the range. This rear diffuser adds the cut-outs and the depth the standard bumper lacks: gloss black out of the box, taped and screwed to the underside of the bumper, and nothing is cut.\u003c\/p\u003e\n\u003ch3\u003eAbout the rear diffuser\u003c\/h3\u003e\n\u003cp\u003eA one-piece rear diffuser in an S3 V1 design that sits in the lower centre of the rear bumper around the exhaust. It is vacuum-formed plastic, which keeps the part light and lets it flex over a knock rather than crack.\u003c\/p\u003e\n\u003cp\u003eIt arrives in gloss black with the protective film still on, ready to go on the car. Once fitted the rear of the car has the depth and the shadow line it was missing.\u003c\/p\u003e\n\u003ch3\u003eWill it fit your Audi?\u003c\/h3\u003e\n\u003ctable style=\"width: 99.941%; height: 58.7814px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003cth style=\"width: 51.6133%; height: 19.5938px;\"\u003eModel\u003c\/th\u003e\n\u003cth style=\"width: 16.0509%; height: 19.5938px;\"\u003eYears\u003c\/th\u003e\n\u003cth style=\"width: 28.9731%; height: 19.5938px;\"\u003eFits\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 51.6133%; height: 19.5938px;\"\u003eAudi S3\/ S-Line 8V Saloon\u003c\/td\u003e\n\u003ctd style=\"width: 16.0509%; height: 19.5938px;\"\u003e2012 onwards\u003c\/td\u003e\n\u003ctd style=\"width: 28.9731%; height: 19.5938px;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 51.6133%; height: 19.5938px;\"\u003eS3 8V Sportback\u003c\/td\u003e\n\u003ctd style=\"width: 16.0509%; height: 19.5938px;\"\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 28.9731%; height: 19.5938px;\"\u003eNo — different moulding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eVacuum-formed plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFinish\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGloss black, ready to fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePieces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFixing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAutomotive double-sided tape and screws into the underside of the bumper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFitting time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAbout an hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOne piece, protective film applied. Tape and screws are not included — use a good automotive double-sided tape such as 3M and 4mm self-tappers.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePart no.\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCW-57\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitting it\u003c\/h3\u003e\n\u003cp\u003eClean the lower bumper with panel wipe. Dry fit the diffuser around the exhaust and check the cut-outs line up before the backing paper comes off. Warm both surfaces, press from the centre outwards, then add the screws into the plastic underside of the bumper. Leave it 24 hours before a jet wash.\u003c\/p\u003e\n\u003ch3\u003eDelivery, fitting and returns\u003c\/h3\u003e\n\u003cp\u003eDelivery is £20 to any UK or Ireland address, on every body kit part. Or have it fitted at Blade Performance in Portadown for an extra £20 — supplied and fitted the same day, and we warrant the fit. Check the diffuser against the car before the protective film comes off, and let us know about any transit damage within 48 hours of delivery.\u003c\/p\u003e\n\u003ch3\u003eWhat it won't do\u003c\/h3\u003e\n\u003cp\u003eThe exhaust layout has to match — check the cut-outs against your tips before ordering.\u003c\/p\u003e\n\u003cp\u003eIt does not change the exhaust note or the tips; it is a styling part.\u003c\/p\u003e\n\u003cp\u003eIt is not injection-moulded ABS. Vacuum-formed plastic is lighter and more forgiving on impact, but it is thinner, and it is not a structural part.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Audi S3 8V Saloon rear diffuser need painting?\u003c\/strong\u003e\u003cbr\u003eNo. It is supplied in gloss black and goes straight on the car.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need drilling?\u003c\/strong\u003e\u003cbr\u003eTape holds the alignment and screws into the plastic underside of the bumper hold it for good. Nothing goes into bodywork or paint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it fit my exhaust?\u003c\/strong\u003e\u003cbr\u003eOnly the layout on the fitment line above. Check the cut-outs against your tips before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I collect it or have it fitted?\u003c\/strong\u003e\u003cbr\u003eYes. Collect from the shop in Portadown, or book it in and we fit it while you wait.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComplete the kit:\u003c\/strong\u003e pair it with a \u003ca href=\"\/collections\/front-lips\"\u003efront splitter\u003c\/a\u003e and \u003ca href=\"\/collections\/side-skirts\"\u003eside skirts\u003c\/a\u003e for the full look.\u003c\/p\u003e\n\u003cp\u003eSee the rest of the \u003ca href=\"\/collections\/audi-a3-8v-body-kits\"\u003eAudi S3 8V Saloon body kit range\u003c\/a\u003e.\u003c\/p\u003e","brand":"Carbonwerk","offers":[{"title":"Default Title","offer_id":56300956877185,"sku":"CW-AN1031826-57","price":145.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/2316\/1362\/files\/WhiteAudiS3AgainstMountainSky.png?v=1791209298"},{"product_id":"audi-a3-8v-sport-s-line-front-splitter","title":"Audi A3 8V S-Line\/S3 Front Splitter ABS","description":"\u003cp\u003e2012-2016 \u003c\/p\u003e\n\u003cp\u003eDurable ABS \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Blade Performance ","offers":[{"title":"Default Title","offer_id":56368563847553,"sku":null,"price":99.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/2316\/1362\/files\/White_Audi_S-Line_in_Overcast_Parking_Lot.png?v=1791325613"},{"product_id":"audi-a3-8v-sport-s-line-front-splitter-copy","title":"Audi A3 8V FL Sport Front Splitter","description":"\u003cp\u003e2012-2016 \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Blade Performance","offers":[{"title":"Default Title","offer_id":56368565879169,"sku":null,"price":0.0,"currency_code":"GBP","in_stock":false}]},{"product_id":"audi-a3-8v-fl-sport-s-line-front-splitter-copy","title":"Audi A3 8V Sport Moulded Skirt","description":"\u003cp\u003e2012-2020\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Blade Performance","offers":[{"title":"Default Title","offer_id":56368567255425,"sku":null,"price":0.0,"currency_code":"GBP","in_stock":false}]},{"product_id":"audi-a3-8v-fl-sport-front-splitter-copy","title":"Audi A3 8V FL S-Line\/S3 Front Splitter","description":"\u003cp\u003e2012-2016 \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Blade Performance","offers":[{"title":"Default Title","offer_id":56368588456321,"sku":null,"price":99.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/2316\/1362\/files\/ChatGPT_Image_Oct_7_2026_12_07_33_AM.png?v=1791328080"},{"product_id":"audi-a3-8v-s-line-s3-front-splitter-copy","title":"Audi A3 8V Sport Front Splitter","description":"\u003cp\u003e2012-2016 \u003c\/p\u003e\n\u003cp\u003eABS\u003c\/p\u003e","brand":"Blade Performance","offers":[{"title":"Default Title","offer_id":56368601432449,"sku":null,"price":99.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0759\/2316\/1362\/files\/MoodyAudiSedaninRainyLot_2.png?v=1791326518"},{"product_id":"a3-8v-side-skirt-extension-all-models","title":"A3 8V Side Skirt Extension - All Models","description":"","brand":"Blade Performance ","offers":[{"title":"Default Title","offer_id":56368641900929,"sku":null,"price":0.0,"currency_code":"GBP","in_stock":false}]}],"url":"https:\/\/www.bladeperformance.shop\/collections\/audi-a3-8v-body-kits.oembed?page=2","provider":"Blade Performance ","version":"1.0","type":"link"}